Understanding VoIP
What is VoIP? It stands for Voice over Internet Protocol. It is a technology that
lets you make telephone calls over the Internet, rather than a regular phone line.
Which is almost always cheaper.
In order to use VoIP, both sender and receiver need to have a "broadband"
connection. This is a high-speed Internet connection usually provided by cable
or a DSL modem. Broadband modems are usually used to connect computers to
the Internet, but in the case of VoIP, computers are not necessary, because now
there are telephones that connect directly.
High-Speed Connection
The simplest form of VoIP is a computer-to-computer voice connection. The only
requirements: a computer with a broadband connection, a headset consisting of
earphones and microphone, and VoIP software.
Most VoIP software packages are free (you can download one from the Internet at
versiontracker.com), and they allow you to connect to any computer that also has
VoIP software. The only time that both parties need the same VoIP software
package is when they are making computer-to-computer calls. There is no charge
for this type of connection, and calls can be made to anywhere in the world.
VoIP software can also be used to connect to landline phones, that is, phones
that are not connected directly to the Internet. This type of call is usually not free,
but still costs quite a bit less than your telephone company charges. Some VoIP
services also allow you to make calls to cellular phones. Parties receiving landline
or cellular calls do not need any extra equipment or software.
Your Voice Becomes Data
VoIP is based on digital data transmission. So, the first step in any VoIP call is to
convert the analog human voice into digital data and divide it into groups of
numbers. The next step is to compress the data to reduces the data size as much
as possible without sacrificing audio quality.
The compressed digital data is then divided into packets which adds information
about their destination and their place in the data stream.
Multi-Layer Transmission
Now you probably don't need to know about this section of techno-speak, so feel
free to skip to the final section. I won't be offended.
All data sent over the Internet has discrete layers to aid in its accurate delivery.
For example, a network layer specifies destination and origin addresses, a
transport layer creates a connection between 2 computers, and an application
layer might allow a page to be displayed correctly at the receiving end.
The transport layer used by most VoIP transmissions is called User Datagram
Protocol, which is a very high-speed protocol. A commonly used application layer
is Real-time Transmission Protocol, which provides information about the
sequence of the data packets, so they can be reconstructed in the correct order
at their destination.
Data Becomes Voice
If packets do not arrive within a certain time limit, they are dropped. This is
necessary to avoid unacceptable delays in the audio stream. Even though some
packets are sometimes dropped, there is usually enough information left to make
the conversation understandable. The number of packets that are dropped
depends on the speed of your Internet connection and the distance between the
2parties.
Once the voice data has arrived at its destination, it is reassembled in the correct
order and converted from digital back to analog -- the sound of your voice.
About the Author: Ron King is a full-time researcher, writer, and web developer.
Visit http://www.voip-solutions-now.com to learn more about this subject.
Copyright 2005 Ron King.
What is VoIP? It stands for Voice over Internet Protocol. It is a technology that
lets you make telephone calls over the Internet, rather than a regular phone line.
Which is almost always cheaper.
In order to use VoIP, both sender and receiver need to have a "broadband"
connection. This is a high-speed Internet connection usually provided by cable
or a DSL modem. Broadband modems are usually used to connect computers to
the Internet, but in the case of VoIP, computers are not necessary, because now
there are telephones that connect directly.
High-Speed Connection
The simplest form of VoIP is a computer-to-computer voice connection. The only
requirements: a computer with a broadband connection, a headset consisting of
earphones and microphone, and VoIP software.
Most VoIP software packages are free (you can download one from the Internet at
versiontracker.com), and they allow you to connect to any computer that also has
VoIP software. The only time that both parties need the same VoIP software
package is when they are making computer-to-computer calls. There is no charge
for this type of connection, and calls can be made to anywhere in the world.
VoIP software can also be used to connect to landline phones, that is, phones
that are not connected directly to the Internet. This type of call is usually not free,
but still costs quite a bit less than your telephone company charges. Some VoIP
services also allow you to make calls to cellular phones. Parties receiving landline
or cellular calls do not need any extra equipment or software.
Your Voice Becomes Data
VoIP is based on digital data transmission. So, the first step in any VoIP call is to
convert the analog human voice into digital data and divide it into groups of
numbers. The next step is to compress the data to reduces the data size as much
as possible without sacrificing audio quality.
The compressed digital data is then divided into packets which adds information
about their destination and their place in the data stream.
Multi-Layer Transmission
Now you probably don't need to know about this section of techno-speak, so feel
free to skip to the final section. I won't be offended.
All data sent over the Internet has discrete layers to aid in its accurate delivery.
For example, a network layer specifies destination and origin addresses, a
transport layer creates a connection between 2 computers, and an application
layer might allow a page to be displayed correctly at the receiving end.
The transport layer used by most VoIP transmissions is called User Datagram
Protocol, which is a very high-speed protocol. A commonly used application layer
is Real-time Transmission Protocol, which provides information about the
sequence of the data packets, so they can be reconstructed in the correct order
at their destination.
Data Becomes Voice
If packets do not arrive within a certain time limit, they are dropped. This is
necessary to avoid unacceptable delays in the audio stream. Even though some
packets are sometimes dropped, there is usually enough information left to make
the conversation understandable. The number of packets that are dropped
depends on the speed of your Internet connection and the distance between the
2parties.
Once the voice data has arrived at its destination, it is reassembled in the correct
order and converted from digital back to analog -- the sound of your voice.
About the Author: Ron King is a full-time researcher, writer, and web developer.
Visit http://www.voip-solutions-now.com to learn more about this subject.
Copyright 2005 Ron King.
| VOIP Solution Journal.com |
| ____________________________________________________________________ |
| ____________________________________________________________________ |
| VoIP Solution Article ID 147160 |
| Selecting a VoIP Solution- Business VoIP Service. VoIp Solutions, providers, Service, resources, articles, tips, and help for selecting a VoIp Solution Today! |
| Copyright © voipsolutionjournal.com - 2007 All Rights Reserved - VOIP Solution Journal VoIP Solution Journal Selecting a VoIP Solution for Home or Business. VoIp Solutions, providers, Service, resources, articles, tips, and information for selecting a VoIp Solution. |